Care

the 4-Carelevel

Care instructions

Care instructions

Perfect care for your wooden floor with the 4-care levels

$

Carelevel I

FIRST CARE after laying:

– Basic cleaning with WOCA intensive cleaner & care with WOCA care oil:

  1. Clean the floor with 125 ml WOCA intensive cleaner mixed with 5 litres of water and allow to dry for at least 8 hours.
  2. Before use, shake WOCA care oil thoroughly and distribute it evenly (natural care oil for naturally oiled floors, white care oil for white oiled floors); spread over approx. 4 m2 area approx. Distribute 100 ml of care oil with pad, cloth or spray bottle, on larger surfaces with a polishing machine.
  3. Work the care oil intensively with a beige or white pad until the surface is completely saturated and the wood has its original, fresh appearance.
  4. Then the floor with oil suction cloths, if necessary. also dry with the polishing machine. No oil must be left on the surface. Treat the remaining floor area in the same way.

With the machine polished floors are after approx. Pre-hardened for 4 hours at 20°C, hand-treated floors only after 24 hours. Afterwards, running zones can be covered for 1 day with HAFRO cover fleece and walked gently. Do not wipe the soil damp in the first few days.

Care:

– Daily cleaning with vacuum cleaner or broom

– Regular cleaning with WOCA wood floor soap:

  1. WOCA wood floor soap (nature for colourless oiled floors, white for white oiled floors) shake well before use.
  2. Mix 125 ml with 5 litres of warm water. We recommend working with 2 buckets, one with soapy water, one with clear water.
    Wipe the floor with soapy water with the HAFRO wiping mop. Remove dirt, pick it up and rinse the mop in a bucket of clear water.
  3. Wipe wet with fresh soap solution and allow to dry Do not wipe with clear water, do not leave puddles standing!

INQUIRY:

– Basic cleaning with WOCA intensive cleaner & refreshment with WOCA care oil:

  1. Clean the floor with 125 ml WOCA intensive cleaner mixed with 5 litres of water and allow to dry for at least 8 hours.
  2. Before use, shake WOCA care oil thoroughly and distribute it evenly (natural care oil for naturally oiled floors, white care oil for white oiled floors); spread over approx. 4 m2 area approx. Distribute 100 ml of care oil with pad, cloth or spray bottle, on larger surfaces with a polishing machine.
  3. Work the care oil intensively with a beige or white pad until the surface is completely saturated and the wood has its original, fresh appearance.
  4. Then the floor with oil suction cloths, if necessary. also dry with the polishing machine. No oil must be left on the surface. Treat the remaining floor area in the same way.

With the machine polished floors are after approx. Pre-hardened for 4 hours at 20°C, hand-treated floors only after 24 hours. Afterwards, running zones can be covered for 1 day with HAFRO cover fleece and walked gently. Do not wipe the soil damp in the first few days.

SECURITY NOTE: Oil-soaked cloths can self-ignite. Soak them with water and place them in a tightly closing container store and dispose of.

$

Carelevel II

FIRST CARE after laying is not necessary, floor is already oiled ready for use.

 

Care:

  • – Daily cleaning with vacuum cleaner or broom
  • Regular cleaning with OSMO wipe-fix concentrate: 1 cap per 1 litre of water – wipe wet, wipe dry if necessary

INQUIRY:

  • Cleaning with WOCA Intensive Cleaner: Clean the floor with 125 ml WOCA Intensive Cleaner mixed with 5 litres of water and leave to dry for at least 8 hours.
  • Refreshing with OSMO wax care and detergent: Apply with an active fibre cloth (approx. 2 teaspoons per m2), spread evenly over the surface and work in.

SECURITY NOTE: Oil-soaked cloths can self-ignite. Soak them with water and place them in a tightly closing container store and dispose of.

$

Carelevel III

FIRST CARE after laying is not necessary, floor is already oiled ready for use.

 

Care:

– Daily cleaning with vacuum cleaner or broom

Regular cleaning with WOCA wood floor soap:

  1. Shake the wooden floor soap (nature for colourless oiled floors, white for white oiled floors) well before use.
  2. Mix 125 ml with 5 litres of warm water. We recommend working with 2 buckets, one with soapy water, one with clear water. Wipe the floor with soapy water with the HAFRO wiping mop. Remove dirt, pick it up and rinse the mop in a bucket of clear water.
  3. Wipe wet with fresh soap solution and allow to dry Do not wipe with clear water, do not leave puddles standing!

INQUIRY:

– Cleaning with WOCA Intensive Cleaner: Clean the floor with 125 ml WOCA Intensive Cleaner mixed with 5 litres of water and allow to dry for at least 8 hours.

– Refreshment with RUBIO MONOCOAT care oil:

  1. RUBIO MONOCOAT care oil natural or white manually with a cloth, brush or sponge. Apply with a grounding machine (beige pad). Preferably in zones of 2 to 4 m2 each. The respective treated zones must be wiped with kitchen paper or a cotton cloth within 15 minutes. When using a drill: Dry the floor with a white pad.
  2. Ensure sufficient ventilation so that the soil can dry well. Duration approx. Six to eight hours.
  3. Clean exclusively with a damp cloth during the first few weeks. Then the floor can be cleaned again with WOCA wood floor soap.

SECURITY NOTE: Oil-soaked cloths can self-ignite. Soak them with water and place them in a tightly closing container store and dispose of.

$

Carelevel IV

FIRST CARE after laying:

– Basic cleaning with WOCA Intensive Cleaner & Primary Care with WOCA Neutral Oil Care:

  1. Clean the floor with 125 ml WOCA intensive cleaner mixed with 5 litres of water and allow to dry for at least 8 hours.
  2. Before use, shake WOCA Neutral Oil Care thoroughly and distribute evenly. 4 m2 area approx. Distribute 100 ml Neutral Oil Care with pad, cloth or spray bottle, on larger surfaces with a polishing machine.
  3. Work the Neutral Oil Care intensively with a beige or white pad until the surface is completely saturated and the wood has its original, fresh appearance.
  4. Then the floor with oil suction cloths, if necessary. also dry with the polishing machine. No oil must be left on the surface. Treat the remaining floor area in the same way.

With the machine polished floors are after approx. Pre-hardened for 4 hours at 20°C, hand-treated floors only after 24 hours. Afterwards, running zones can be covered for 1 day with HAFRO cover fleece and walked gently. Do not wipe the soil damp in the first few days.

CARE:

– Daily cleaning with vacuum cleaner or broom

– Regular cleaning with WOCA wood floor soap natural:

  1. Shake WOCA wood floor soap naturally well before use.
  2. Mix 125 ml with 5 litres of warm water. We recommend working with 2 buckets, one with soapy water, one with clear water. Wipe the floor with soapy water with the HAFRO wiping mop. Remove dirt, pick it up and rinse the mop in a bucket of clear water.
  3. Wipe wet with fresh soap solution and allow to dry Do not wipe with clear water, do not leave puddles standing!

INQUIRY:

– Basic cleaning with WOCA Intensive Cleaner & Refreshment with WOCA Neutral Oil Care:

  1. Clean the floor with 125 ml WOCA intensive cleaner mixed with 5 litres of water and allow to dry for at least 8 hours.
  2. Before use, shake WOCA Neutral Oil Care thoroughly and distribute evenly. 4 m2 area approx. Distribute 100 ml Neutral Oil Care with pad, cloth or spray bottle, on larger surfaces with a polishing machine.
  3. Work the Neutral Oil Care intensively with a beige or white pad until the surface is completely saturated and the wood has its original, fresh appearance.
  4. Then the floor with oil suction cloths, if necessary. also dry with the polishing machine. No oil must be left on the surface. Treat the remaining floor area in the same way.

With the machine polished floors are after approx. Pre-hardened for 4 hours at 20°C, hand-treated floors only after 24 hours. Afterwards, running zones can be covered for 1 day with HAFRO cover fleece and walked gently. Do not wipe the soil damp in the first few days.

SECURITY NOTE: Oil-soaked cloths can self-ignite. Soak them with water and place them in a tightly closing container store and dispose of.

$

carelevel V

BASIC CLEANING:

– Basic cleaning with WOCA intensive cleaner:

  1. Mix the intensive cleaner with water in a ratio of 1:10 and clean the surface thoroughly.
  2. Then allow to dry completely.

CARE:

– Daily cleaning with vacuum cleaner or broom

– Care with WOCA vinyl and varnish care:

  1. Pour vinyl and varnish care into a PVC bucket.
  2. Dip the cotton cloth into the vinyl and varnish care and wring hard.
  3. Apply vinyl and varnish care thinly with cotton cloth or fur wipers. Quickly insert the entire floor area and do not work over areas that are already drying up. Vinyl and varnish care is required after approx. Dried for 30 minutes.

Dealer

Documents for our dealer partners:

HaFro Holzagentur GmbH
Niedernfritzerstrasse 118
5531 Eben im Pongau
Austria